The Dakota PMX4-DL High Penetration Thickness Gauge Z-225-0002 is designed specifically for use on materials that are difficult to penetrate sound, due to the lack of material consistency, grain structure, and overall thickness.
With multiple high voltage pulser options, as well as filters tuned for lower frequency transducers (500 kHz 10 MHz), the Dakota PMX4-DL High Penetration Thickness Gauge compliments our product range by adding additional material types to our list of application possibilities. Common material types of interest are Fiberglass, carbon fiber, cast metals, rubber, high density polyethylene (HDPE), fiber reinforced plastic (FRP), lead, and all steels and aluminums.
Typical target applications are Fiberglass sheets, pipes, storage tanks, aerospace composites, boat hulls, conveyor belts, composite plastics, etc. There are a variety of features and tools to accommodate a number of material types and applications. The electronic platform is FPGA driven for speed and accuracy. The screen refresh rate of 25Hz contributes to the overall responsiveness of the gauge.
The built-in data logger has two file format options, grid or sequential, and is equipped with an internal 4Gb SD card for memory. Connectivity to a standard PC or Apple via USB-C, and used in conjunction with our Windows PC or OSX reporting software available for download, at no charge, on our website
Probes/Transducers ouTransducer Cable are sold separately
| Pulse-Echo Range | Steel .050 in. 100.0 ft. (1.27 mm 30.5 M) Composites .100 in. 5.00 in. (2.54 mm 127 mm) |
| Echo-Echo Range | Steel .100 in.3.0 ft. (2.54 mm91.44 cm) |
| Echo-Echo Verify Range | Steel .1006.0 in. (2.54152.4 mm) |
| Resolution | (selectable) +/- .01 inch (0.1 mm). +/- .001 inch (0.01 mm) |
| Velocity Range | 0.0122 to 0.7300 inches/s 309.88 to 18542 meters/sec. |
| Pulser | Spike 200 volt, Square Wave 400 volt, Tone Burst 400 volt, all adjustable with variable pulse widths and voltage settings |
| Receiver | Manual or AGC gain control with 110dB range, varies with mode selected. Adjustable damping (50, 75, 100, 300, 600 & 1500 ohms) |
| Frequency Range | 500 kHz to 10MHz |
| Timing | Precision TCXO timing with single shot 100 MHz 8 bit ultra low power digitizer |
| Power | Three AA cells. Alkaline 35 hrs, Nicad 10 hrs, and NI-MH 35 hrs. *dependent on pulser & backlight settings. |
| Operating Temperature | 14 to 140F (-10C to 60C) |
| Data Output | USB-C port. Windows PC interface software |
| Display | 1/8in VGA grayscale display (240 x 160 pixels); viewable area 2.4 x 1.8in (62 x 5.7mm); EL backlit (on/off/auto invert) |
| Transducer Compatibility | Single Contact (1 to 10 MHz, and custom 500 kHz delay line (HPD1005B) |
| Transducer Connector | Locking quick disconnect LEMO "00" connector |
| Dimensions | Width (2.5in/63.5 mm) Height (6.5 in/165 mm) Depth (1.24 in/31.5 mm) |
| Weight | 13.5 ounces (with batteries) |
Precision Thickness Transducers
Wall Thickness Gauge Accessories
| Dakota PMX4-DL High Penetration Thickness Gauge Z-225-0002 - Data Sheet |
| Dakota PMX4-DL High Penetration Thickness Gauge Z-225-0002 - Instruction Manual |