Ultrasonic Wall Thickness Gauges

The DeFelsko UTGC1-G PosiTector UTG C1 Standard Ultrasonic Thickness Gage with PRBUTGC-C Corrosion Probe, Probe Type 5 MHz Dual Element, Range 0.040" to 5.000" is used to measure the wall thickness of materials such as steel, plastic and more using ultrasonic technology. Ideal for measuring the effects of corrosion or erosion on tanks, pipes or any structure where access is limited to one side.

Please click on the links below for additional information on the models available for this product:

The DeFelsko PRBUTGC-C PosiTector UTG C Corrosion Probe Ultrasonic Thickness Gage is used to measure the wall thickness of materials such as steel, plastic and more using ultrasonic technology. Ideal for measuring the effects of corrosion or erosion on tanks, pipes or any structure where access is limited to one side.

Please click on the links below for additional information on the models available for this product:

The Dakota Ultrasonics ZX-1 Ultrasonic Wall Thickness Gauge Z-300-0001 / Z-300-0003 will hold a single velocity, making it the perfect choice applications where only one material is being tested day after day. With the preset velocity in the gauge, you simply turn it on and go to work. The Dakota Ultrasonics ZX-1 Ultrasonic Wall Thickness Gauge Z-300-0001 / Z-300-0003 allows the operator to adjust the acoustic velocity (speed of sound through a given material) from 0.0120 to .7300 in/?s. 305 to 18,542 meters/sec to calibrate the gauge for use on a wide variety of materials. The programmed velocity can be locked to prevent accidental adjustment. Typically used on applications where a single material type is tested. It is designed for measuring wall thickness and the extent of corrosion on a wide range of materials. It is commonly used for checking the thickness of pipes, tanks, plates and other objects. It is designed and built to withstand harsh industrial conditions and is backed by a 5 year limited warranty.

Please click on the links below for additional information on the models available for this product:

The DeFelsko UTGM1-G PosiTector UTG M1 Standard Ultrasonic Thickness Gauge with PRBUTGM-C Multiple Echo Probe, Thru-Paint Capability, Probe Type 5 MHz Contact, Range Multiplo Echo: 0.100" to 2.500" is used to measure the wall thickness of materials such as steel, plastic and more using ultrasonic technology. Ideal for measuring the effects of corrosion or erosion on tanks, pipes or any structure where access is limited to one side. Multiple echo (UTG M) Thru-Paint models measure the metal thickness of a painted structure without having to remove the coating.

Please click on the links below for additional information on the models available for this product:

The Dakota Ultrasonics ZX-3 Ultrasonic Wall Thickness Gauge Z-302-0001 / Z-302-0003 accurately measures wall thickness and the extent of corrosion of all metals, ceramics, glass and most rigid plastics - from only one side! It can measure thickness up to 36 inches (915 mm), depending upon the material and transducer. The Dakota Ultrasonic ZX-3 Ultrasonic Wall Thickness Gauge combines the best features of the ZX-2 allowing the operator to select from 8 preset materials as well as program 2 custom material velocities, plus allows free adjustment of the velocity as desired and allows the end-user to calibrate to a sample of known thickness where the velocity is automatically calculated. Additionally, to optimize linearity over a wide range, the user can perform a 2 point calibration to two samples of known thickness. The optimal velocity is automatically calculated to provide the highest accuracy and linearity between the low and high calibration points. The ZX-3 can be used in a Single Thickness Reading mode or in a Scan mode , where the probe is dragged over a large measuring area. The minimum thickness reading recorded during the "scan" will be displayed. The ZX-3 probe is waterproof and can be submerged in water. The gauge is impact-resistant and environmentally sealed (IP65) to provide trouble-free operation under the toughest field conditions

Please click on the links below for additional information on the models available for this product:

The Checkline NIST-Traceable Steel Test Blocks is ideal to check the accuracy of ultrasonic thickness gauges. All blocks are made from ultrasonically tested material and include NIST traceable Certification Reports and hardwood storage cases.

Please click on the links below for additional information on the models available for this product:

The Dakota Ultrasonics T-102-2000 Transducer is a 1/4" diameter, 5.00 MHz dual element transducer. Potted cable, side in

Please click on the links below for additional information on the models available for this product:

The Checkline Uncertified Steel Test Block For Ultrasonic Gauges is ideal for convenient confirmation of thickness gauge calibration, when NIST-Traceable Calibration Step Blocks are NOT REQUIRED.

Please click on the links below for additional information on the models available for this product:

The DeFelsko UTGM3-G Positector UTG M3 Advanced Ultrasonic Thickness Gage with PRBUTGM-C Multiple Echo Probe measures the wall thickness of materials such as steel, plastic and more using ultrasonic technology. Ideal for measuring the effects of corrosion or erosion on tanks, pipes or any structure where access is limited to one side. Multiple echo (UTG M) Thru-Paint models measure the metal thickness of a painted structure without having to remove the coating.

Please click on the links below for additional information on the models available for this product:

The Dakota Ultrasonics MAX-II Ultrasonic Bolt Tension Monitor Z-197-0001 is designed for precision measurement of fasteners up to 100 ft / 30 m in length. It incorporates all of the great features of the original MiniMax unit, with improved features, hardware, speed, and range. The MAX II is designed for use in a wide range of industrial and lab applications. The MAX-II Bolt Tension Monitor enables you to accurately monitor bolt tension ultrasonically measuring the elongation (change in length) of your bolts. It enables you to re-visit your bolts in certain intervals and monitor the quality of your bolt connections over time. The new "Auto Correlation" feature that helps you to optimize your transducer placement. Together with the large QVGA sunlight readable color display and the calibration function, it is very easy to use without the steep learning curves associated with other models.

Please click on the links below for additional information on the models available for this product: