Dakota PSLM501B - 1.00MHz 1/2" Single Element Contact Transducers - High Wear - Medium - BNC Side
Similar Products to Consider
Dakota Single Element Contact Transducers are the common 0 transducers and are ideal for inspecting large, simple geometry materials.
Single Element Contact transducers are longitudinal wave transducers that are designed to be used in direct contact with the part or component being inspected.
They are available in multiple configurations, including high wear, fingertip for difficult-to-access areas and membrane in a variety of frequencies.
Specifications
Dakota 1.00MHz Single Element Contact Transducers
| Part Number | Probe Diameter | Probe Characteristic | Damping | Microdot | Lemo | BNC | Top | Side | PZX | PMX | FX70 |
| PSLM501B | 1/2" | High Wear | M |  | | | | | |||
| PSLM501L | 1/2" | High Wear | M | | | | | | |||
| T-8041-0868 | 1/2" | Membrane | M | | | | | | |||
| T-4043-0865 | 1/2" | Finger Tip | S | | | | | | |||
| T-5043-0865 | 1/2" | Finger Tip | S | | | | | | |||
| PSLM751B | 3/4" | High Wear | M | | | | | | |||
| PSLM751L | 3/4" | High Wear | M | | | | | | |||
| PSLM101B | 1" | High Wear | M | | | | | | |||
| PSLM101L | 1" | High Wear | M | | | | | | |||
| T-8071-0868 | 1" | Membrane | M | | | | | |
M - Medium Damped Transducer
S - Standard Undamped Transducer
Related Products
Dakota Ultrasonics PCX8-DL Precision Thickness Gauges - Z-314-0001
- The Dakota Ultrasonics PCX8-DL Precision Thickness Gauges - Z-314-0001 range comes with all the features and functionality necessary for precisely measuring material thickness on virtually any material. Flexible & easy to use, the Dakota PCX Precision Thickness Gauge has a measurement range from 0.15mm (0.006") to 25.40mm (1.000") with up to 1% accuracy, across three measurement modes; Interface Echo (IE), Echo Echo (EE) & Plastic mode (PLAS).
Dakota Ultrasonics PMX2-DL (PVX) Precision Ultrasonic A-scan Thickness Gauge Z-157-0004 / Z-157-0006
- The Dakota Ultrasonics PMX2-DL (PVX) Precision Ultrasonic A-scan Thickness Gauge Z-157-0004 / Z-157-0006 provides the flexibility necessary for both high resolution and penetration requirements. It's ability to use a variety of single element transducers for specific applications: Standard Delay Line (acrylic and graphite tips for metals and thin plastics), Pencil Delay Line (tough access area on thin materials), and Contact transducers (variety of applications) makes it the perfect flexibel tool for very precise and delicate measurements.
Dakota Ultrasonics FX70-DL (DFX-7) Ultrasonic Flaw Detector Z-220-0003 - Thickness Gauge
- The Dakota Ultrasonics FX70-DL (DFX-7) Flaw Detector Complete Kit, Z-220-0003 / Z-220-0005 - Thickness Gauge is both, an ultrasonic flaw detector, as well as an ultrasonic A/B Scan thickness scope, in a single unit. Thickness gauge are specifically setup to very accurately measure thickness, locate pits, flaws and blind surface corrosion. All the linearity tables, correction curves for various types of longitudinal transducers and features are built with dimensional thickness as its primary focus.
