ElektroPhysik MiniTest 430 Ultrasonic Thickness Gauge, Supplied as a complete kit including 5 Mhz probe - TRA/005430



Price: $ 2,080.00

ElektroPhysik MiniTest 430 Ultrasonic Wall Thickness Gauge
Includes "Scan-Mode" to display MIN and MAX values at 10 readings/second
Automatic identification of probes with Auto Probe Zero
Several Transducers are optionally available including one for High Temperature materials (350 C)

Includes built-in datalogger with USB output

Sturdy and accurate ultrasonic thickness gauge based on the ultrasonic pulse run-time method.

6 ultrasonic probes with frequencies ranging between 2 and 10 MHz in different designs offer a broad spectrum of applications and thickness measurements ranging from 0.65 mm to 500 mm. A high temperature ultrasonic probe is also available, designed for measurement of hot materials with temperatures of up to 350 C.

The device is equipped for automatic detection of the intelligent ultrasonic probes and re-calibration is not required upon switching probes. The calibration data of the sensor is saved in the probe.

Uninterrupted scanning of a part for thinning is possible at the minimum mode.


line
Features
line

  • Includes Factory "Works" Calibration Certificate
  • NIST Traceable Calibration Certificate optionally available at additional cost
  • Suitable for measurement of various materials including steel, stainless steel, aluminum, glass, plastics (PS/PE)
  • Built-in Datalogger with 5000 data values (500 values in 10 batches ) with USB Output
  • Includes "Scan-Mode" to display MIN and MAX values at 10 readings/second
  • Adjustable units inch/mm
  • Resolution of 0.001" (0.01 mm)
  • Automatic identification of probes
  • Automatic Probe Zero function
  • Uses Pulse-Echo Principle of Ultrasonics
  • Sensitivity can be set to "Auto" or "Manual"
  • Several Transducers are optionally available including one for High Temperature materials (350 C)
  • Warranty 1-Year
  • Made in Germany


line
Specifications
line

Measuring rangePulse Echo: With standard transducer U5.0: 0.8 - 350 mm (0.03 - 13.8") (For ranges of other transducers see table)
Resolution0.01mm (0 99.9 mm), 0.1(> 100 mm)
Display128 x 64 pixels with backlight
Velocity Range0.0492 to .3937 in/s. 1250 to 10,000 meters/sec preset sound velocity of 9 materials
Measuring modePulse-Echo
Standard: normal operation | Minimum : detection of thinnest point | Difference: deviation of reading to preset value| Alarm
Scan
High speed scan for high temperature surfaces
ProbeStandard transducer U5.0: 8mm (0.31") (For diameter of other transducers see table)
Operation Temperature-20 to 50C (-4 to 122F)
CableSoftware and data transmission cable
Battery TypeTwo AA batteries
Battery Lifemore than 80 hours under continuous operation
Weightapprox. 6.70 oz (190 g)
Size5.1 x 2.9 x 0.94" (130 X 73 X 24 mm)
Accessories IncludedU5.0 5 MHz standard transducer, Operating instructions, two 1.5V AA batteries, Plastic carrying case, Coupling liquid (200 ml), cable
Data storage10 groups with max. 500 values each
Data interfaceUSB
Calibrationautomatic
Housing ProtectionIP40


line
Range
line

TypeDiameterFrequencyMeasuring Range
U5.08 mm | 0.31"5.0 MHz0.8 350 mm | 0.031 - 13.8"
U2.012 mm | 0.47"2.0 MHz2.0 500 mm | 0.079 - 19.7"
U7.56 mm | 0.24"7.5 MHz0.65 - 50 mm | 0.026 - 1.97"
U10.04 mm | 0.16"10.0 MHz0.65 20 mm | 0.026 - 0.79"
U5.0HT13 mm | 0.51"5.0 MHz3.0 200 mm | 0.12 - 7.87"

line

TypeMaterial TemperatureApplication
U5.0-12 to 60 Con flat surfaces or huge curvature radii
U2.0-12 to 60 Crough surfaces such as cast iron
U7.5-12 to 60 Cthin w all thickness and small curvature radii
U10.0-12 to 60 Csmall tube diameters
U5.0HT-12 to 350 Cfor temperatures up to 350 C


line
Downloads
line

ElektroPhysik MiniTest 420 Ultrasonic Wall Thickness Gauge - Data Sheet
ElektroPhysik MiniTest 420 Ultrasonic Wall Thickness Gauge - Instruction Manual

Order Online
Check the items you would like to order then click "Add To Cart". Items typically ship within 1 Week
Product Price
ElektroPhysik MiniTest 430 Ultrasonic Thickness Gauge, Supplied as a complete kit including 5 Mhz probe - TRA/005430 $2,080.00
Accessories Price
ElektroPhysik 85-804-0650 U5.0 standard transducer, 5.0 MHz frequency, diameter 8mm , measuring range 0.8…350mm $315.00
ElektroPhysik 85-804-0652 U2.0 transducer, 2.0 MHz frequency, diameter 12mm, measuring range 2.0…500mm $365.00
ElektroPhysik 85-804-0651 U7.5 transducer, 7.5 MHz frequency, diameter 6mm, measuring range 0.65…50mm $315.00
ElektroPhysik 85-804-0654 U10.0 transducer, 10.0 MHz frequency, diameter 4mm, measuring range 0.65…20mm $620.00
ElektroPhysik 85-804-0653 U5.0 High Temperature transducer, 5.0 MHz frequency, diameter 13mm, measuring range 3.0…200mm, max. surface temperature 350°C $530.00

 



 
 

Powered by Marctin Web Architecture