MMX-7 Ultrasonic Thickness Gauge with T-102-2700 PROBE, Z-160-0001



Price: $ 2,125.00

MMX-7 High Performance Data Logging Wall Thickness Gauge

Range: 0.025 - 19.999 inches - 0.60 - 254.0 mm


Dakota MMX-7 Ultrasonic Thickness Gauge with Enhanced Data Logging with time based B Scan for a cross section view


Resolution:.001" (0.01 mm)


Datalogging:YES



The new CHECK-LINE MMX-7 is a full featured ultrasonic thickness gauge offering an oversized display as well as a complete alphanumeric datalogging system with storage capacity of thousands of data values.

The MMX-7 features the highest resolution graphic LCD on the market and is especially engineered for optimal ease of use.

line
Features
line

  • The time-based B-Scan feature displays a cross section of the test material. It is commonly used to display the profile of the bottom surface of the test material.
  • The MMX-7 also comes complete with our Windows PC software for transferring data to and from a PC.
  • Built in hardware AGC gain control for through paint measurements in multi mode operation.
  • The high speed scan feature speeds up the inspection process by making 32 measurements per second. Remove transducer from the test material, and display the minimum measurement scanned.
  • The MMX-7 has the ability to store 64 custom user defined setups. All factory setups can be selected, edited and saved to any setup location.
  • Use the AUTOFIND feature to locate the detection point, while automatically adjusting the display to bring the signal into view.
  • CE Certified
  • Includes NIST-Traceable Calibration Certificate
  • Use the visual alarm to set hi and lo limits for applications requiring specific tolerances. If the actual thickness value is above or below the limits, a red light is illuminated.
  • 2 Year Warranty

lineSpecificationsline

Range in SteelPulse-Echo Mode:Pit and Flaw detection measures from 0.63 to 254 millimeters (0.025 - 9.999inches)

Echo-Echo Mode:Thru Paint & coatings measures from 2.54 to 102 mm (0.100 - 4.000 inches). Range will vary depending on the thick
Resolution.001 inches (0.01mm)
Velocity Range.0492 to .3936 in./ms
1250 to 9999 meters/sec
UnitsEnglish & Metric
Measurement Modes- Pulse-Echo (flaws, pits)
- Echo-Echo (thru-paint)
Transducer TypesDual Element (1 to 10 MHz).
Memory16 megabit non-volatile ram
Memory capacity12,000 pages with 1 reading and waveform per page
Power SourceThree 1.5V alkaline or 1.2V NiCad AA cells
Battery LifeTypically operates for 150 hours on alkaline and 100 hours on NiCad
Auto Power offif idle 5 min
Display1/8 in. VGA grayscale display 62 x 45.7mm
KeyboardMembrane switch with twelve tactile keys
CaseExtruded aluminum body with nickel-plated aluminum end caps (gasket sealed).
Operating Temperature-14 to 140F (-10 to 60C)
Weight, net383 grams
Dimensions63.5 W x 165 H x 31.5 D mm
Warranty2 year limited
CertificationCE Approved, Factory calibration traceable to national standards


lineComplete Kitline

The MMX-7 is supplied as a complete kit with the gauge, 4 oz. bottle of coupling fluid, 2 AA batteries, NIST-Traceable Calibration Certificate, data transfer software, serial output cable and Operating Instruction Manual - all in a foam-fitted carrying case.

lineRelated Productsline

NIST-Traceable Steel Test Block
3 Sizes Available

  • Precision Machined and Finished
  • Includes NIST Report and Test Data

line

DataComm
Software for Thickness Gauges
ABQ

line

CF12
Coupling Fluid

  • Used to create an ultrasonic coupling between the probe and material to be measured
  • 12 oz Bottle

line

TICC-M
Protective Holder for Ultrasonic Gauges

  • Constructed from heavy duty Cordura Nylon
  • Built-in belt loop

line

Uncertified Steel Test Block
For Ultrasonic Gauges
  • For convenient confirmation of thickness gauge calibration

lineBuy Nowline


Order Online
Check the items you would like to order then click "Add To Cart". Items typically ship within 1 Week
Product Price
MMX-7 Ultrasonic Thickness Gauge with T-102-2700 PROBE, Z-160-0001 $2,125.00
Accessories Price
TICC-MVX Protective Holder for MMX-7 $75.00
T-102-2700 1/4 inch dia 5.0 MHz alpha hi-damp transducer for through paint measurement $330.00
T-104-0600 1/2 inch dia. 1.0 MHz composite transducers $345.00
T-104-1000 1/2 inch dia. 2.25 MHz transducer $295.00
T-102-1000 1/4 inch dia. 2.25 MHz transducer $285.00
T-104-2000 1/2 inch dia. 5.0 MHz transducer $295.00
T-101-2000 3/16 inch dia. 5.0 MHz transducer $285.00
T-102-3300 1/4 inch dia. 7.5 MHz transducer $320.00
T-044-2000 1/2 inch dia. 5.0 MHz high temp (650 degrees F) transducer $370.00
USB-RS232-ADAP USB to Serial Adapter $25.00
T-212-2001 1/4 inch - 5 MHz Hi Temp - 900 degrees F / 500 degrees C Dual Microdot connectors, top-in $445.00

 



 
 

Powered by Marctin Web Architecture