TI-MMX-SDL High Performance Ultrasonic Thickness Gauge (PROBE NOT INCLUDED)

Price: $ 2,095.00

TI-MMX-SDL High Performance Ultrasonic Thickness Gauge
Enhanced Data Logging with time based B Scan for a cross section view

Range: 0.025 - 9.999 inches - 0.60 - 254.0 mm

Resolution:.001" (0.01 mm)
Datalogging: YES

The TI-MMX-SDL High Performance Data-Logging Thickness Gauge is a full featured ultrasonic thickness gauge offering an oversized display as well as a complete alphanumeric datalogging system with storage capacity of thousands of data values.

The TI-MMX-SDL High Performance Data-Logging Thickness Gauge features the highest resolution graphic LCD on the market and is especially engineered for optimal ease of use.


  • The time-based B-Scan feature displays a cross section of the test material. It is commonly used to display the profile of the bottom surface of the test material.
  • Built in hardware AGC gain control for through paint measurements in multi mode operation.
  • The TI-MMX-SDL High Performance Data-Logging Ultrasonic Thickness Gauge has the ability to store 64 custom user defined setups. All factory setups can be selected, edited and saved to any setup location.
  • CE Certified
  • Use the visual alarm to set hi and lo limits for applications requiring specific tolerances. If the actual thickness value is above or below the limits, a red light is illuminated.
  • TheTI-MMX-SDL High Performance Data-Logging Ultrasonic Thickness Gauge also comes complete with our Windows PC software for transferring data to and from a PC.
  • The high speed scan feature speeds up the inspection process by making 32 measurements per second. Remove transducer from the test material, and display the minimum measurement scanned.
  • Use the AUTOFIND feature to locate the detection point, while automatically adjusting the display to bring the signal into view.
  • Includes NIST Calibration Certificate
  • 2 Year Warranty


Range in SteelPulse-Echo Mode: Pit and Flaw detection measures from 0.63 to 254 millimeters (0.025 - 9.999inches)

Echo-Echo Mode: Thru Paint & coatings measures from 2.54 to 102 mm (0.100 - 4.000 inches). Range will vary depending on the thickness of the coating.
Resolution.001 inches (0.01mm)
Velocity Range.0492 to .3936 in./ms
1250 to 9999 meters/sec
UnitsEnglish & Metric
Measurement ModesPulse-Echo (flaws, pits)
Echo-Echo (thru-paint)
Transducer TypesDual Element (1 to 10 MHz).
Memory16 megabit non-volatile ram
Memory capacity12,000 pages with 1 reading and waveform per page
Power SourceThree 1.5V alkaline or 1.2V NiCad AA cells
Battery LifeTypically operates for 150 hours on alkaline and 100 hours on NiCad
Auto Power offif idle 5 min
Display1/8 in. VGA grayscale display 62 x 45.7mm
KeyboardMembrane switch with twelve tactile keys
CaseExtruded aluminum body with nickel-plated aluminum end caps (gasket sealed).
Operating Temperature-14 to 140F (-10 to 60C)
Weight, net383 grams
Dimensions63.5 W x 165 H x 31.5 D mm
Warranty2 year limited
CertificationCE Approved, Factory calibration traceable to national standards

lineComplete Kitline

The TI-MMX-SDL High Performance Data-Logging Wall Thickness Gauge is supplied as a complete kit with the gauge, 4 oz. bottle of coupling fluid, 2 AA batteries, NIST Calibration Certificate, data transfer software, serial output cable and Operating Instruction Manual - all in a foam-fitted carrying case.

lineOptional Accessoriesline

NIST-Traceable Steel Test Block
3 Sizes Available

  • Precision Machined and Finished
  • Includes NIST Report and Test Data


Uncertified Steel Test Block
For Ultrasonic Gauges
  • For convenient confirmation of thickness gauge calibration


Protective Holder for Ultrasonic Gauges

  • Constructed from heavy duty Cordura Nylon
  • Includes wrist & shoulder straps


Coupling Fluid

  • Used to create an ultrasonic coupling between the probe and material to be measured
  • 12 oz Bottle


Transducer Holder

  • The V-Block transducer holder offers the operator greater control and repeatabily when measuring on pipes and other curved areas


TI-MMX-SDL High Performance Ultrasonic Thickness Gauge - Instruction Manual
TI-MMX-SDL High Performance Ultrasonic Thickness Gauge -Certificate

lineBuy Nowline

Order Online
Check the items you would like to order then click "Add To Cart". Items typically ship within 1 Week
Product Price
TI-MMX-SDL High Performance Ultrasonic Thickness Gauge (PROBE NOT INCLUDED) $2,095.00
Accessories Price
T-102-3300 Spare / Replacement Probe for TI-25M $320.00
T-104-1000 Wall Thickness Gauges Spare / Replacement Probe for TI-25M-107 $295.00
T-104-2000 Spare / Replacement Probe for TI-25M-HW $295.00
T-212-2001 1/4 inch - 5 MHz Hi Temp - 900 degrees F / 500 degrees C Dual Microdot $445.00
UTGC Spare / Replacement PosiTector UTG Corrosion Probe Only PRBUTGC-C $25.00
T-102-2700 Spare / Replacement Probe for TI-25DL-MMX $330.00
T-104-0600 1/2 inch dia. 1.0 MHz composite transducers $345.00
T-102-1000 1/4 inch dia. 2.25 MHz transducer $285.00
T-044-2000 1/2 inch dia. 5.0 MHz high temp (650 degrees F) transducer $370.00
TICC-MVX Protective Holder for TI-CMX $75.00
BATT-RC4AA-WC 4-pack 2300mAh AA Ni-MH Rechargeable Batteries & Charger Kit $35.00
T-101-2700 3/16 inch - 5.0 MHz alpha hi-damp transducer for through paint measurement $325.00
T-104-2700 1/2 inch - 5.0 MHz alpha hi-damp transducer for through paint measurement $345.00
T-101-2000 3/16 inch dia. 5.0 MHz transducer $285.00



Powered by Marctin Web Architecture