TI-MVX Ultrasonic Thickness Gauge with Enhanced Display (Probe Sold Separately)



Price: $ 2,285.00

TI-MVX Ultrasonic Thickness Gauge with Enhanced Display
Enhanced graphic scope Displays A Scan & B Scan for a cross section view

Range: 0.025 - 9.999 inches - 0.63 - 254.0 mm


Resolution:.001" (0.01 mm)

Datalogging: YES

The TI-MVX Ultrasonic Thickness Gauge with Enhanced Display offers a series of advanced features including A-Scan, B-Scan as well as a complete alphanumeric datalogging system with storage capacity of thousands of data values and A-scan captures.

The TI-MVX TI-MVX Ultrasonic Thickness Gauge with Enhanced Display features the highest resolution graphic LCD on the market and is especially engineered for optimal ease of use. The TI-MVX Ultrasonic Thickness Gauge with Enhanced Display is supplied as a complete kit with all accessories in carrying case with FREE software, transfer cable and NIST-Traceable Calibration Certificate.

line
Features
line

  • The MVX is equipped with multiple viewing options to provide users with a complete set of inspection tools: (RF waveform, +/- Rectified waveform, Time based B-Scan, and Large Digits).
  • The A-Scan rectified mode is commonly used for detecting flaws/pits in pulse-echo mode and measuring through paint and coatings in echo-echo mode.
  • The time-based B-Scan feature of the MVX displays a cross section of the test material. It is commonly used to display the profile of the bottom surface of the test material.
  • Built in hardware AGC gain control for through paint measurements in multi mode operation.
  • The MVX has the ability to store 64 custom user defined setups. All factory setups can be selected, edited and saved to any setup location.
  • CE Certified
  • Use the visual alarm to set hi and lo limits for applications requiring specific tolerances. If the actual thickness value is above or below the limits, a red light is illuminated.
  • Use the find feature to locate the detection point, while automatically adjusting the display to bring the signal into view.
  • MVX also comes complete with our Windows PC software for transferring data to and from a PC.
  • Includes Flaw Inspection - Prove Up Mode, (special probe required)
  • The high speed scan feature speeds up the inspection process by making 32 measurements per second. Remove transducer from the tesst material, and display the minimum measurement scanned.
  • Includes NIST Calibration Certificate

lineSpecificationsline

Range in Steel*Pulse-Echo Mode: Pit and Flaw detection measures from 0.63 to 254 millimeters (0.025 - 9.999inches)
Echo-Echo Mode: Thru Paint & coatings measures from 2.54 to 102 mm (0.1 - 4.0 inches).
Range will vary +/- depending on the thickness of the coating.
*Range varies by transducer, multiple transducers are required to cover entire range
Resolution.001 inches (0.01mm)
Velocity Range.0492 to .3936 in./ms
1250 to 9999 meters/sec
UnitsEnglish & Metric
Measurement ModesPulse-Echo (flaws, pits)
Echo-Echo (thru-paint)
Transducer TypesDual Element (1 to 10 MHz).
Memory16 megabit non-volatile ram
Memory capacity12,000 pages with 1 reading and waveform per page
Power SourceThree 1.5V alkaline or 1.2V NiCad AA cells
Battery LifeTypically operates for 150 hours on alkaline and 100 hours on NiCad
Auto Power offif idle 5 min
Display1/8 in. VGA grayscale display 62 x 45.7mm
KeyboardMembrane switch with twelve tactile keys
CaseExtruded aluminum body with nickel-plated aluminum end caps (gasket sealed).
Operating Temperature-14 to 140F (-10 to 60C)
Weigth, net383 grams
Dimensions63.5 W x 165 H x 31.5 D mm
Warranty2 year limited
CertificationCE Approved, Factory calibration traceable to national standards


lineComplete Kitline

The TI-MVX Ultrasonic Thickness Gauge with Enhanced Display is supplied as a complete kit with the gauge, 4 oz. bottle of coupling fluid, 2 AA batteries, NIST Calibration Certificate, data transfer software, serial output cable and Operating Instruction Manual - all in a foam-fitted carrying case.

lineOptional Accessoriesline

NIST-Traceable Steel Test Block
3 Sizes Available

  • Precision Machined and Finished
  • Includes NIST Report and Test Data

line

Uncertified Steel Test Block
For Ultrasonic Gauges
  • For convenient confirmation of thickness gauge calibration

line

TICC-M
Protective Holder for Ultrasonic Gauges

  • Constructed from heavy duty Cordura Nylon
  • Built-in belt loop

line

CF12
Coupling Fluid

  • Used to create an ultrasonic coupling between the probe and material to be measured
  • 12 oz Bottle

line

V-Block
Transducer Holder

  • The V-Block transducer holder offers the operator greater control and repeatabily when measuring on pipes and other curved areas

line

TICC-MVX
Protective Holder for Ultrasonic Gauges

  • Constructed from heavy duty Cordura Nylon
  • Includes wrist & shoulder straps

lineDownloadsline

TI-MVX Ultrasonic Thickness Gauge with Enhanced Display - Certificate
TI-MVX Ultrasonic Thickness Gauge with Enhanced Display - Software
TI-MVX Ultrasonic Thickness Gauge with Enhanced Display - Instruction Manual
TI-MVX Ultrasonic Thickness Gauge with Enhanced Display - Data Sheet

lineBuy Nowline


Order Online
Check the items you would like to order then click "Add To Cart". Items typically ship within 1 Week
Product Price
TI-MVX Ultrasonic Thickness Gauge with Enhanced Display (Probe Sold Separately) $2,285.00
Accessories Price
CF12 Coupling Fluid - 12oz $30.00
V-Block Transducer Holder $175.00
T-102-3300 Spare / Replacement Probe for TI-25M $320.00
T-104-1000 Wall Thickness Gauges Spare / Replacement Probe for TI-25M-107 $295.00
T-212-2001 1/4 inch - 5 MHz Hi Temp - 900 degrees F / 500 degrees C Dual Microdot $445.00
UTGC Spare / Replacement PosiTector UTG Corrosion Probe Only PRBUTGC-C $175.00
T-102-2700 Spare / Replacement Probe for TI-25DL-MMX $330.00
T-104-0600 1/2 inch dia. 1.0 MHz composite transducers $345.00
T-102-1000 1/4 inch dia. 2.25 MHz transducer $285.00
QW5045 1/2 inch-45 Deg Angle Acrylic Wedge $42.50
QW5070 1/2 inch-70 Deg Angle Acrylic Wedge $42.50
QCR5050 1/2 inch-5MHz Hi-Res Quick-change Single Element Contact Transducer for use in flaw mode $260.00
QW5060 1/2 inch-60 Deg Angle Acrylic Wedge $42.50
T-104-0000 1/2 inch dia 1.0 MHz transducer for composites, thick plastics, rubber $290.00
T-044-2000 1/2 inch dia. 5.0 MHz high temp (650 degrees F) transducer $370.00
TICC-MVX Protective Holder for TI-CMX $75.00
N-104-0021 4 ft Cable, Dual Lemo-to-Single Microdot $120.00
CF12 Coupling Fluid - 12oz $30.00
N-110-0020 10 inch Single Lemo to Microdot Cable $120.00
USB-RS232-ADAP USB to Serial Adapter $25.00
T-8060-0868 3/4 inch -1MHz Cmpzt Single Element Contact Transducer (PSLM-715) with BNC Connector. Requires N-104-0021-BNC Cable $415.00
N-104-0021-BNC TI-MVX FLaw Cable, Dual Lemo-00 with BNC Connector $85.00

 



 
 

Powered by Marctin Web Architecture